BLS Zer0 Flat and BLS 600next series filter facepieces feature a flat design that ensures a good balance between protection and ease of breathing.
In recent years, the market for respiratory protection devices has seen a rise in the adoption of flat-design filtering facepieces.
This configuration, often consisting of three flaps, allows for better adaptability to the face, greater breathing comfort and greater compatibility with other PPE.
In this article, we focus on two BLS series that feature this characteristic: BLS Zer0 Flat and BLS 600next, analysing them in detail, highlighting similarities and differences, and offering useful insights for professional users and purchasing managers.
The flat, three-panel design allows the facepiece to follow the natural movements of the face during breathing, facial expressions or lateral movements, maintaining a constant seal and protection. An innovative feature of the BLS design is the folded bottom flap: when opened to put on or take off the facepiece, the risk of contaminating the inside of the facepiece is minimised, which is an important advantage in critical environments.
In addition, this geometry can contribute to an 'optimal' internal volume: neither too small (which would impair breathing) nor too large (which would compromise comfort and compatibility). A well-calibrated design offers a balance between protection and ease of breathing.
BLS Zer0 Flat series is one of the best solutions in respiratory protection in terms of breathing comfort, guaranteeing P3 protection with the breathability of a P1.
The devices in this series feature a surface micro-mesh that prevents clogging of the filter material and absorption of liquids, extending the life of the device. In addition, the design allows them to be folded and stored when not in use and has the advantage of not having metal points that can be uncomfortable when in contact with the face and the elastic bands are made of textile material for greater acceptability by operators.
Another strength of BLS Zer0 33 is undoubtedly its high breathability. This translates into less moisture build-up inside the facepiece, reducing fatigue during prolonged use and significantly improving comfort without compromising the level of protection. The efficiency of the design and the choice of materials ensure optimal water vapour transmission, allowing the skin to breathe and keeping the face dry.
The availability of two sizes meets the needs for fit and seal of the facepiece on a variety of face shapes and therefore allows for an excellent success rate in fit testing. This requirement is even more important given that this is a filtering facepiece used in contexts that require P3 protection.
BLS 600next series represents BLS's offering in the FFP2 segment with a three-flap design, in an updated version geared towards everyday use in moderate-risk environments.
The filtering facepieces in this series can be used to protect the wearer's respiratory tract from solid and/or non-volatile liquid particles up to 12 times the weighted limit value (TLV-TWA). The four-point elastic harness, internal nose clip and sealing gasket ensure excellent adaptability for most face shapes. In addition, the availability of two sizes has been designed to achieve the best fit test results, even for small faces.
This model is therefore a suitable solution for contexts where FFP2 protection is adequate, prioritising comfort, ease of use and versatility.
Feature | BLS Zer0 Flat | BLS 600next |
|---|---|---|
| Maximum protection class | FFP3 | FFP2 |
| Flat three-panel design | ✔ | ✔ |
| Single pack | ✔ | ✔ |
| Internal nose clip | ✔ | ✔ |
| Elastic bands with no exposed metal | ✔ - fabric | ✔ - rubber |
| Armor protective layer | ✔ | |
| Valve | High-performance Eolo® (versions available with/without valve) | Standard (versions available with/without valve) |
| Comfort | Very high, thanks to high breathability and use of advanced technologies | Excellent for FFP2 class; valve helps in harsh conditions |
| Field of vision / glasses compatibility | Wide field of vision guaranteed | Similar, optimised design |
| Available sizes | S and M/L | S and M/L |
| Storage life | 10 years | 10 years |
| Recommended areas of use | Where high protection is required (e.g. environments with toxic dust, fumes and aerosols, as well as nanoparticles) | Moderate risk environments, healthcare, light industry, everyday contexts |
BLS team invites you to the 4th edition ofSAFETY EXPO 2019The free reference event in Italy for fire prevention and health and safety in the workplace.September 18th and 19th, at Bergamo FieraSTAND 39
BLS è al Roadshow "Safety in action" Stettino (Polonia), 23 aprile 2026 BLS sarà presente alla prima tappa del Roadshow “Safety in Action”, iniziativa promossa da Confindustria Polonia dedicata alla sicurezza sul lavoro e alla diffusione dell’expertise italiana nel mercato polacco. L’evento si terrà il 23 aprile 2026 a Stettino e rappresenta un’occasione di confronto […]
Tecnologie BLS per le maschere intere Le tecnologie utilizzate per garantire il massimo della protezione e del comfort nelle maschere intere BLS Le maschere intere BLS proteggono l’intero viso e assicurano un fattore di protezione elevato, maggiore a qualsiasi altro dispositivo riutilizzabile. Ma quali tecnologie vengono utilizzate per garantire il massimo della protezione […]
