Подпишитесь на нашу рассылку, чтобы быть в курсе последних событий
Нажмите здесь
  • Продукция BLS

Focus | BLS 2600next PAPR

BLS Powered Air Purifying Respirator with dust filter


What you need to overcome respiratory resistance

 

Powered breathing apparatuses use a battery-operated motor that draws air through filters to the full-face mask to which they are attached, supporting the user's breathing.

BLS 2600 next Powered Air Purifying Respirator (PAPR) is an assisted ventilation system for use with a full face mask and dust filter. It provides the user with filtered ambient air and thanks to the constant air flow and the absence of respiratory effort, is the ideal solution for heavy-duty use.

 

Suitable for long-term use

New rechargeable LI-Ion battery. High-performance and lightweight, the battery guarantees a battery life of over 10 hours for optimised comfort. When discharged, simply connect it to the robust and ergonomic connector until the LED on the charger signals.

 

Intuitive alarm management: what is it?

The innovative management system provides the operator with the following feedback via the 3 coloured LEDs: battery charge status, low battery alarm, flow blockage alarm, filter clogging alarm, charging status. All alarms are also signalled by sound and vibration. All alarms are also signalled by a sound and vibration. This multi-sensory feedback system (sound, visual, vibration) increases the level of user safety and comfort during use.

 

 

Experience automatic flow adjustment

Thanks to this system, a flow rate of 160 l/min is guaranteed, even if the filter is clogged.

 

What does the new IP66 certify?

The IP certification is an internationally recognised protection standard (IEC standard 60529) issued by International Protection. This certification identifies the resistance of any device to the intrusion of liquids, dust and solids.

Our PAPR was subjected to specific tests to test its resistance capabilities, based on which the protection code was determined.

The protection code is expressed in IPXX format, where the first number identifies the type of protection from dust and solid objects certified by the device, and the second number the protection from liquids. The BLS PAPR is certified as resistant to dust of any size and in the protection from waves or large jets of water (downpours, fountains, waves).

 

See all BLS product compatibilities

This device is compatible with BLS 5000 series full face masks with universal connection and silicone face seal (BLS 5400) or thermoplastic rubber (BLS 5150). The corrugated hose connection is inserted at the universal connection EN 148-1. This device is combined with the BLS TMP3 dust filter, which provides high filtration over long periods of time. This filter is protected by an easily removable ring nut and, thanks to a practical anti-water cap, is protected during the decontamination shower.

 

What is the decontamination shower?

At the end of use, it is essential to safely remove the PAPR and carry out the decontamination shower, to prevent the user from being contaminated by contaminants when removing the protective device. The DIN cap and filter cap will protect the motor and filter from water.Once this step is complete, simply follow the storage instructions and store all components in the sturdy storage box, which is equipped with four handles, a gasket and a padlock facility.

Go to BLS 2600next PAPR product page to download datasheets and find all the details you need.

 

Choose the protection best suited to your needs.
Choose BLS

 

 

 

Предыдущая
Micro-organisms
Следующий
Gases and vapours

Статьи по Теме

Июль 9, 2021 BLS 8000next: the new ready-to-use half mask is now available

La nuova semimaschera con filtri incorporati BLS 8000next combina la semplicità dei dispositivi usa e getta con l’alto livello di protezione dei dispositivi riutilizzabili. É progettata per essere sostituita quando i filtri si esauriscono ed è eccellente contro particolato e gas. La forma dell'oronasale garantisce una tenuta ottimale, evitando punti di pressione sul viso dell’utente, […]

Ссылка
Февраль 2, 2022 Февральские события | Что дальше

Eventi di febbraio Scopri gli eventi BLS di Febbraio   22-25 febbraio Sicur 2022 La più importante fiera sulla sicurezza della Spagna, Sicur 2022, avrà luogo a Madrid. Noi saremo lì, vieni a trovarci allo stand n. 4A02, ti aspettiamo! Questa edizione si focalizzerà su temi quali innovazione e sviluppo tecnologico, per affrontare la sicurezza […]

Ссылка
Ноябрь 15, 2021 BLS Webinar

Segui i nostri prossimi appuntamenti webinar! Di seguito i dettagli del prossimo webinar tenuto da BLS Iberia, in collaborazione con Formación en Seguridad Laboral, che tratterà le differenze tra i diversi DPI e l'importanza del Fit-Test.   Mercoledì 17 novembre, ore 16.30-17.30 Il futuro della protezione respiratoria e l'importanza del Fit-test Vogliamo aiutarvi a misurare […]

Ссылка
Подпишитесь на рассылку новостей
Ricevi aggiornamenti sui nostri eventi, le novità in catalogo e le prossime iniziative.
Подписаться

Свяжитесь с нами

Scrivici per ogni tua esigenza, ti risponderemo entro 48 ore.
Richiedi informazioni

BLS S.R.L.
Компания с одним участником
via dei Giovi, 41 - 20032 Cormano (MI) - Италия
т/ф +39 02 39310212 / 66200473
info@blsgroup.it
Политика конфиденциальности - Политика использования файлов cookie

Юридический адрес
via dei Giovi, 41 - 20032 Cormano (MI) - Италия
Уставный капитал | Уставный капитал: 600 000,00 евро i.v.
C.C.I.A. - R.E.A.: MI 1186898
Номер НДС: IT12296780153
C.F. e Iscrizione al Registro delle Imprese di Milano: 07822320151

BLS IBERIA / Av. Pau Casals, 8 08182 Sant Feliu de Codines Barcelona - Spain
BLS NORTHWEST / Reeweg, 132 3343 AP H.I. Ambacht Rotterdam - The Netherlands
BLS DO BRASIL / Rua Alvarenga Peixoto, 307 05095-010 Sao Paulo - SP - Brazil
BLS ГЕРМАНИЯ / Штайндайх 1а, 25377 Колмар - Германия
BLS ФРАНЦИЯ / 18 Porte du Grand Lyon 01700 Neyron - Франция

крестменюшевронный низкрестообразный круг
RU