BLS 301 P2 prefilter (code 8117008), which is compatible with BLS 200 series filters, can now be used for more than one shift, according to EN 143:2021.
As required by the standard itself, the new marking does not include the letter 'R': the prefilter is therefore marked as 'P2', which automatically implies that it is the reusable version.
BLS 301 P2 prefilters, in combination with all BLS 200 series gas filters (in particular, BLS 211 A2, BLS 212 AX, BLS 213 ABE1, BLS 214 ABEK1, BLS 242 ABE2, BLS 243 ABEK2 and BLS 244 K2 filters), can be used where there is a concomitant presence of medium-toxicity dusts/fumes/fibres. Once clogged, the prefilter can be replaced, thus extending the life of the gas filter.
Another case in which its use is typically recommended is spray painting: the return of paint would tend to quickly saturate the gas filter, making it unusable. Replacing only the prefilter, on the other hand, significantly extends the life of the filter in use.
BLS 200 series filters are compatible with BLS 4000next half mask and BLS 5000 full face mask, with bayonet connection. Both products are available in two materials: soft silicone or thermoplastic rubber. The half mask also comes in two sizes: S/M and M/L, to suit different physiognomies.
Our range of BLS 400 series filters, with unified EN148-1 connection, is getting wider with the introduction of the new BLS 442 Reaktor A2P3 filter (code 8117005), for protection against radioactive iodine, including radioactive methyl iodide and radioactive dust.
This filter is recommended for use in nuclear power plants, including in decommissioning operations.
The filter is compatible with all full face masks with RD40 universal connection, such as those of BLS 5000 and BLS 3000 series.
Istruzioni d'indossaggio | BLS Zer0 Indossare un DPI nel modo corretto è fondamentale per trarne massima efficacia e migliori performance di prodotto. La protezione respiratoria individuale ha lo scopo di difendere chi la utilizza da sostanze nocive o agenti patogeni presenti nell'aria. Prima di utilizzarla, è fondamentale ricevere un'adeguata formazione sul corretto metodo di indossaggio. […]
BLS team invites you to the 4th edition ofSAFETY EXPO 2019The free reference event in Italy for fire prevention and health and safety in the workplace.September 18th and 19th, at Bergamo FieraSTAND 39
Artigianato ecosostenibile con MAIA Shapes MAIA shapes ha partecipato all'Expo che si è tenuto giovedì 21 luglio a La Fabbrica della Puglia. Le tavole ecosostenibili di questo marchio italiano hanno sfilato all'evento del Surf Week Tour insieme a Flamingo Surf Club. Tavole artigianali che rispettano l'ambiente Oltre a essere dei surfisti professionisti, Alessandro e […]
