The new version of the BLS 4000next half-mask, in silicone, is now available
BLS, always focused on the quality of its products and their continuous improvement in terms of performance and comfort, introduces a new edition of the well-known BLS 4000next S half mask in soft hypoallergenic silicone.
Below are the new features introduced:
The previous version in two sizes was able to meet the fitting needs of over 90% of European, Asian and African facial shapes. With the introduction of a third size, we have redesigned the profile of the M/L size, now M, in a way that is barely perceptible but significant. This size now provides the best fit for the majority of faces, while sizes S and L make it possible to meet the needs of
particularly small or particularly large facial profiles, thereby satisfying the protection requirements of all users.
The already excellent fit test performance of BLS 4000next S half mask is therefore further improved, making the device suitable for all facial shapes.
The size of the half mask is marked on the front part of the facepiece.
The new elastic head harness is more resistant and features lower elongation than the previous version, ensuring better stability of the facepiece on the face, even when using combined filters, which are larger and heavier
The locking of the drop-off system has been optimised to prevent even the slightest sliding of the facepiece along the elastic head harness when the user prefers to deactivate the drop-off function. The grooves on the lower part of the front cover allow the elastic band to be firmly secured, preventing the facepiece from slipping.
In high temperatures, or during prolonged use, sweat may often accumulate inside the half mask. To minimise discomfort, we have added a sweat drainage hole at chin level, which helps evacuate excess moisture.
As in the previous version, an embossed arrow is visible on the body of the half mask, near the filter connection. This makes filter assembly intuitive, as a corresponding arrow on the filter body indicates the attachment point to the facepiece and the direction in which the filter must be rotated
Certification: EN 140:1998 + AC : 1998
Technical data sheet and declarations of conformity are available on the website
At the same time, our range of kits, consisting of BLS 4000next S half mask and filters,
has been rationalised and will be offered only in size M, as follows:
BLS 4000next R half mask in TPE remains unchanged in terms of size range, which continues to include two sizes, while incorporating the same improvements to the elastic head harness and drop-off locking system.
The codes remain unchanged:
BLS 4000next S and R half masks are equipped with b-lock bayonet connections and must be used with BLS Series 200 filters, as well as the BLS 5600 and BLS 5700 twin-filter full face masks.
Maschere pieno facciale e occhiali da vista: come risolvere il problema della compatibilità Scopri la soluzione sicura per integrare le lenti correttive nei DPI senza compromettere la protezione. Chi utilizza dispositivi di protezione individuale (DPI) in ambienti ad alto rischio sa quanto sia importante garantire la massima sicurezza senza compromettere il comfort. Tuttavia, per […]
Per Fit Test si fa riferimento ai metodi di valutazione dell'efficienza di un dispositivo di protezione respiratoria in termini di tenuta sul viso dell'utilizzatore. Perché eseguire un Fit Test? Sebbene negli ultimi anni si presti maggiore attenzione alla salute sui luoghi di lavoro, l'uso scorretto o l’inadeguata selezione dei dispositivi di protezione per le vie […]
Sapresti dire quali sono le differenze tra una mascherina FFP2 e una FFP3? I facciali filtranti, o Filtering Face Pieces (FFP) proteggono dai cosiddetti "particolati", i quali identificano comunemente diversi tipi di particelle presenti nell'aria: le polveri, le nebbie e i fumi. In questa tipologia di prodotti il livello di protezione viene definito in base […]
