Abonneer je op onze nieuwsbrief om op de hoogte te blijven
Klik hier
  • BLS
  • Spotlight

Painting application

Which filters should be used for painting?


Practical guide to choosing respiratory protection

 

Painting is an activity that exposes you to several potentially harmful chemicals, such as paints and solvents, and requires the careful selection of personal protective equipment (PPE), particularly filters for respiratory masks. Choosing the right filter means ensuring the safety, effectiveness and durability of the device itself.

Type A filters for most paints and solvents

In most cases, the paints and solvents used are composed of organic substances whose boiling point is above 65°C. For these situations, it is recommended to use type A filters, specifically designed for organic vapours with boiling points above this threshold.

Next to the A filter, it is essential to combine a prefilter with at least P2 classification. The prefilter has a very important dual function:

  • To filter out solid particles: during painting, particles of titanium dioxide, silver and silicon dioxide are present in the paint. These microparticles are effectively retained by the P2 prefilter, thus protecting the anti-gas part (active carbon) of the main filter.

  • Blocking overspray: overspray is the return of undeposited paint particles to the surface to be painted. Without a suitable prefilter, these particles would quickly clog the activated carbon of the filter, necessitating its early replacement.

The practical result is that the P2 prefilter, once clogged, can be easily replaced, significantly extending the life of the gas filter and maintaining high protection.

When to choose AX filters

There are also more volatile solvents, such as acetone, characterised by a boiling point below 65°C. These require a different type of filter, namely AX filters, designed for organic vapours with a low boiling point.

In the presence of these solvents, the use of the AX filter is mandatory to ensure effective protection against the most volatile and dangerous fumes.

Please refer to the following table for a detailed guide to selecting the right protection:

◉ A Organic gases and vapours with boiling points > 65 °C
◉ AX Organic gases and vapours with boiling point ≤ 65 °C
◉ B Inorganic gases and vapours (e.g. chlorine, hydrogen sulphide, hydrogen cyanide) 
◉ E Acidic gases and vapours (e.g. sulphur dioxide, hydrochloric acid)
◉ K Ammonia and derivatives
◉ Hg Mercury vapours
◎ P Dusts, mists, fumes

 

The golden rule: always consult the safety data sheet

Each chemical has specific characteristics that determine its risk and the type of protection needed. For this reason, it is always a good idea to consult the safety data sheets of the substances used in painting before choosing a filter.

This practice makes it possible to correctly identify the type of filter (A or AX) and the most appropriate prefilter class, avoiding mistakes that could compromise operator safety.

If you have any doubts or would like to learn more about the choice of PPE for your painting business, the BLS team is at your disposal for personalised advice and tailor-made solutions.

 

Stay informed
Stay safe.

 

Gerelateerde artikelen

april 5, 2022 April events | What's next

Eventi di aprile Scopri gli eventi BLS di questo mese   /FIERE/   5 - 7 aprile | HEALTH & SAFETY EVENT 2022 Saremo al NEC di Birmingham in occasione del più grande appuntamento del Regno Unito per chiunque sia responsabile della gestione di un luogo di lavoro sicuro ed efficiente. L'evento avrà luogo insieme […]

Link
januari 1, 2021 Partnerships with Assosistema and Fondazione Politecnico (Polytechnic Foundation)

BLS starts 2021 becoming part of the Milan Polytechnic Foundation, and joining ASSOSISTEMA Confindustria (in the "Safety at work/Safety" section): “We are proud of being part of two of the most important trade associations that will support us in our path and allow us to be more and more positioned and planted into the territory, to continue to make the most of our research work and collaboration with local organizations, to build a safe future," comments Pier Paolo Zani, CEO of BLS.

Link
april 21, 2018 New European Regulation (EU) 2016/425 on PPE

From April 21st 2018, the new EU Regulation 2016/425 has been in force, replacing the previous Directive 89/686/EEC and establishing the requirements for the design and manufacture of personal protective equipment (PPE).

Link

Abonneer op onze nieuwsbrief

Ontvang updates over onze evenementen, nieuws, catalogus en aankomende initiatieven.
Abonneren

Neem contact op

Laat uw bericht achter, wij antwoorden binnen 48 uur.

Vraag informatie aan

Download de gratis veiligheidsgids

Elke sector heeft de juiste bescherming nodig. Download onze gratis veiligheidsgids voor meer informatie.
Scarica
crossmenuchevron-downcross-circle