BLS 3000 series full-face masks are available with an EPDM face seal. They are characterised by theirhigh protection factor and are compatible with the BLS 400 unified connection filter range, for protection against gases/vapours and toxic particulates.
UNIVERSAL RD40 CONNECTION
BLS 3000 series mask has a standardised threaded connection according to EN148-1, which is universal for respiratory protective devices.
EPDM FACE SEAL
In addition to being soft and comfortable for the user, the EPDM gasket is highly resistant to radiant heat and chemical aggression.
POLYCARBONATE VISOR
This feature allows the mask to have a high resistance against chemical agents. Furthermore, to ensure maximum protection in use, the glass is tripartite laminated with an anti-fragmentation EVA layer.
CLASS 3
BLS 3000 series complies with the requirements of Class 3 and is therefore suitable for special professional use, such as for fire-fighting teams. It is therefore characterised by excellent thermal and flame resistance.
ANTI-FOGGING SYSTEM
This system is designed to prevent fogging of the mask visor by controlling the flow of cold and hot air inside the mask and not with easily perishable surface treatments.
5-POINT HARNESS
This harness ensures stable adjustment and the best hold: attached on 5 attachment points directly to the rigid body of the mask, so as not to deform the face seal and not to leave marks on the user's face.
The BLS 3000 series has only one model: BLS 3150, available in one size.
Compared to half masks, full masks provide a much higher Nominal Protection Factor (FPN) and protect the face and eyes from dust, splinters, mechanical shocks and chemicals. In addition, the BLS 3000 series has good resistance to radiant heat and chemical attack and can be used for fire fighting. The 5-point harness makes it stable and quick to remove for easy cleaning.
This device is compatible with BLS 400 series filters with the universal connection.
Sai indossare correttamente un DPI? Indossare un DPI nel modo corretto è fondamentale per trarne massima efficacia e migliori performance di prodotto. Lo scopo della protezione respiratoria individuale è proteggere chi la indossa da sostanze tossiche o patogene diffuse per via aerea. Il suo utilizzo, quindi, dovrebbe essere preceduto da una formazione appropriata sulle […]
Gestione del rischio nella protezione delle vie respiratorie Quando non è possibile eliminare tutti i pericoli di un certo contesto lavorativo, è necessario ridurre al minimo il rischio presente. In che modo? Processo Questa operazione rientra nel cosiddetto processo di "risk management" (gestione del rischio), ovvero il complesso processo finalizzato a identificare, monitorare e […]
BLS Safety Guide: Settore sanitario Guida realizzata dalla monografia redatta dal Dott. Antonio Moffa, dalla Dott.ssa Claudia Beccaria e dall’Ing. Lucrezia Giorgi dell’Unità di Terapie Integrate in Otorinolaringoiatria della Fondazione Policlinico Universitario Campus Bio-Medico di Roma. Il settore sanitario occupa circa il 10% dei lavoratori nell’Unione europea ed è pertanto uno dei più grandi […]
