Abonnez-vous à notre lettre d'information pour rester informé
Cliquez ici
  • BLS

PPE selection

Selection of the most appropriate PPE


When the games get tough, it is essential to protect yourself with Personal Protective Equipment.

The law demands the use of PPE whenever there is a so-called 'residual risk', i.e. the risk that remains after the prevention and protection measures taken by the employer have been implemented.

That's what BLS comes in for. It protects you while doing the most important thing: breathing. 

 

 

Respiratory PPE: selection guide

When selecting respiratory protection, an effective programme must be implemented, which can be categorised into the following steps:

 

  • Identification of oxygen quantities for the entire duration of exposure;
  • Identification of the chemical nature of the hazardous substances and their effects on humans and any synergistic effects;
  • Identification of the physical state of contaminants in the air (dusts, mists, fumes, gases, vapours);
  • Identification of the highest concentrations of hazardous substances during the exposure period;
  • Identification of the odour threshold of hazardous substances;
  • Identification of the permitted occupational exposure limit values (TLVs - Threshold Limit Value**), if any;
  • Identification of collateral hazards, associated with the work/production process that may affect the choice of respiratory protective equipment (e.g. splash, flammability or eye hazard, etc.);
  • Identification of the Minimum Protection Factor (FPM) required in the workplace, which can be defined as the ratio between the worst possible concentration of the contaminant(s) in the air and the maximum allowable concentration inside a respiratory protective device, which is the occupational exposure limit value. FPM = (Contaminant Concentration)/(Contaminant TLV);
  • Identification of the device with a protection factor higher than the minimum required protection factor.

 

Choosing PPE

Once the above checks have been carried out, it is possible to follow a guideline scheme for choosing the most appropriate protective equipment (general values indicated in EN 529:2005).

 

 

 

Nominal protection factor (NPF**) of devices:

FPNBLS DEVICES
DustGases and VapoursCombined
4FFP1--
12FFP2-Half mask with integrated filters-GasX-P2                    Half mask-GasX-P2
16---
33--Half mask with integrated filters-GasX-P3
48Half mask-P3-Half mask-GasX-P3
50FFP3Half mask-GasX-
1000Full face mask-P3-Full face mask-GasX-P3
2000PAPR-TM3Full face mask-GasX-

 


* TLV: Threshold Limit Value –limit of the time-weighted average concentration of hazardous substances in the air, within the breathing zone of a worker, with respect to a specified reference period.

** NPF: Nominal protection factor – guideline value obtained through laboratory tests. In order to assess the expected protection in the workplace, it is necessary to adopt the Assigned Protection Factors (APFs) relevant to the country of reference (EN 529:2005).

 

Stay informed, stay safe.

 

Articles Liés

avril 20, 2022 BLS Articles | How does PPE begin?

Affrontare il rischio residuo: i DPI Come nascono i DPI? Nell’ambiente lavorativo rischi e pericoli vanno gestiti con protocolli orientati a ridurne al minimo l’entità. Il datore di lavoro, infatti, è tenuto a valutare tutti i rischi presenti in azienda, per fare in modo che ogni fattore di rischio possa essere annullato o, se non […]

Link
novembre 10, 2022 Donning Instructions | BLS 500 series

Sai indossare correttamente un DPI? Indossare un DPI nel modo corretto è fondamentale per trarne massima efficacia e migliori performance di prodotto.   Lo scopo della protezione respiratoria individuale è proteggere chi la indossa da sostanze tossiche o patogene diffuse per via aerea. Il suo utilizzo, quindi, dovrebbe essere preceduto da una formazione appropriata sulle […]

Link
octobre 16, 2023 BLS 2000

BLS 2000: in arrivo la nuova maschera intera BLS amplia la propria gamma prodotti con una maschera inedita che garantisce un nuovo livello di comfort e protezione.     La nuova maschera intera BLS 2000 sta arrivando. La BLS 2000 presenta una  connessione standardizzata (secondo la normativa EN 148-1), universale per i dispositivi di protezione respiratoria. […]

Link

Abonnez-vous à la newsletter

Recevez des mises à jour sur nos événements, actualités, catalogue et initiatives à venir.
Souscrire

Contacts BLS Group

Écrivez-nous pour tous vos besoins, nous vous répondrons dans les 48 heures.

Informations requises

Téléchargez gratuitement le guide de sécurité

Chaque secteur a besoin d'une protection adaptée. Pour en savoir plus, téléchargez notre guide de sécurité gratuit.
Scarica
crossmenuchevron-downcross-circle