Abonneer je op onze nieuwsbrief om op de hoogte te blijven
Klik hier
MENU
  • BLS Products
  • Spotlight

Focus | BLS 8000next

27 juni 2024

Focus | BLS 8000next

BLS 8000next series half-masks are ready to use, with no need for maintenance or filter replacement.

SIMPLICITY OF A DISPOSABLE,
PROTECTION OF A REUSABLE

 

The BLS 8000next series of thermoplastic rubber double-filter half-masks are ready to use, without the need for maintenance or filter replacement. Once the filtering capacity of the device is exhausted, it is replaced entirely. The device is designed to be replaced when the filters run out, combining the simplicity of disposable devices with the high level of protection of reusable devices.

Its properties are excellent for protection against particulate matter and gases.

 

What makes this mask perform so well?

BLS 8000next half-masks offer gas and vapour filtration with high-quality activated charcoal, free of toxic additives such as Hexavalent Chromium, ensuring excellent safety performance.
The face mask is made of thermoplastic elastomer that is crushproof and durable. The half-mask is designed for optimal fit and a wide field of vision, reducing pressure on the face and interference with the field of vision thanks to the low filter placement and reduced protrusion.
The mask is also equipped with adrop-off system that allows quick and easy release without removing the headpiece. If necessary, the quick drop-off system can be easily deactivated.
The integrated filters are protected by an external mesh that prevents wear and absorption of splashes, and prevents the release of fibres, ideal for painting activities.
The P3 filters, found in the BLS 8400next and BLS 8600next models, are extracted against nanoparticles down to 0.001 microns.

 

Functional Images.

 

 

What are the advantages of combined filters?

 

The combination filters in BLS half-masks protect against gases, vapours and particulates by means of a dual cartridge: one with pleated filter material for particulates and the other with activated charcoal for gases and vapours, without toxic additives.
According to EN 14387:2004+A1:2008, there are three classes of protection for carbon filters (1 low, 2 medium, 3 high) and three classes for dust filters (P1, P2, P3) based on filter efficiency.

The lifetime of the filter depends on the class and concentration of the pollutant. The protective micro mesh prevents wear and absorption of splashes, preserving filter life and preventing contamination in the working environment, such as during painting.

 

Decorative image

 

Which model best suits your needs?

 

The BLS 8000next series is available in three models, all made of thermoplastic rubber. Each model offers a different protection class to meet different requirements:

  • BLS 8100next with protection A1P2 R D: effective against organic gases and vapours with a boiling point above 65° (class 1) and against particulates (class P2). The nominal protection factor is equal to 12*TLV.
  • BLS 8400next with ABEK1P3 R D protection: effective against organic gases and vapours with a boiling point above 65°, inorganic gases and vapours, acid gases, ammonia and derivatives (class 1) and against particulates (class P3). The nominal protection factor is 33*TLV.
  • BLS 8600next with protection A2P3 R D: effective against organic gases and vapours with a boiling point above 65° (class 2) and against particulates (class P3). The nominal protection factor is equal to 33*TLV.

 

Access the product page BLS 8000next to download the datasheets and find all the details you need, and watch the product video.

Watch the video

Contact us for more information

Gerelateerde artikelen

januari 16, 2025 Focus | BLS 3000

Focus | BLS 3000: la maschera intera classe 3 con connessione universale La maschera a pieno facciale BLS 3000 dispone di guarnizione facciale in EPDM certificata FDA che garantisce una maggiore sicurezza Le maschere intere della serie BLS 3000 sono disponibili con guarnizione facciale in EPDM. Si caratterizzano per l’elevato fattore di protezione e sono […]

Link
oktober 7, 2024 Préventica Lyon 2024

BLS è a Préventica Lyon 2024 Lione (Francia), 08 - 10 ottobre 2024 BLS parteciperà all'edizione 2024 di Préventica Lyon: l'evento dedicato all'informazione sulla salute, la sicurezza e la qualità della vita sul lavoro che si svolgerà a Lione, Francia, dall'8 al 10 di ottobre. Vieni a trovarci allo stand S32     La fiera […]

Link
juli 22, 2022 Surf Week Tour

Artigianato ecosostenibile con MAIA Shapes MAIA shapes ha partecipato all'Expo che si è tenuto giovedì 21 luglio a La Fabbrica della Puglia. Le tavole ecosostenibili di questo marchio italiano hanno sfilato all'evento del Surf Week Tour insieme a Flamingo Surf Club.   Tavole artigianali che rispettano l'ambiente Oltre a essere dei surfisti professionisti, Alessandro e […]

Link

Abonneer op onze nieuwsbrief

Ontvang updates over onze evenementen, nieuws, catalogus en aankomende initiatieven.
Abonneren

Neem contact op

Laat uw bericht achter, wij antwoorden binnen 48 uur.
Vraag informatie aan

BLS S.R.L.
Società a Socio Unico
via dei Giovi, 41 - 20032 Cormano (MI) - Italia
t/f +39 02 39310212 / 66200473
info@blsgroup.it
Privacy Policy - Cookie Policy

Geregistreerd kantoor
via dei Giovi, 41 – 20032 Cormano (MI) - Italia
Capitale Sociale | Share Capital: Euro 600.000,00 i.v.
C.C.I.A.A. - R.E.A.: MI 1186898
Partita IVA | VAT N°: IT12296780153
C.F. e Iscrizione al Registro delle Imprese di Milano: 07822320151

BLS IBERIA / Av. Pau Casals, 8 08182 Sant Feliu de Codines Barcelona - Spain
BLS NORTHWEST / Reeweg, 132 3343 AP H.I. Ambacht Rotterdam - The Netherlands
BLS DO BRASIL / Rua Alvarenga Peixoto, 307 05095-010 Sao Paulo - SP - Brazil
BLS GERMANY / Steindeich 1a, 25377 Kollmar - Germany
BLS FRANCE / 18 Porte du Grand Lyon 01700 Neyron - France

crossmenuchevron-downcross-circle
NL
IT EN ES FR PT RU NL