Abonneer je op onze nieuwsbrief om op de hoogte te blijven
Klik hier
  • BLS

Health risk work sectors | Welding

Welding health risks


The welding sector is one of those considered to be at risk of health consequences for workers. During welding operations, hazardous components such as gases, dust and fumes, radiant energy and other risk factors are released.

 

For the respiratory tract, the inhalation of toxic substances such as aluminium, cadmium and iron dusts and fumes, as well as carbon dioxide (CO2), carbon monoxide (CO) or nitrogen dioxide (NO2) gases, can lead to both acute and chronic health risks and effects.

 

What effects can it have on respiratory health?

As the welding techniques used and the harmful substances released vary, so do the health effects and risks, and it is important to consider the duration and intensity of exposure.

 

Acute respiratory health effects include metal fume fever, also known as welder's fever, and a general decrease in respiratory function, which may include symptoms such as coughing, sputum, wheezing and chest tightness.

 

Welder's fever

This is a flu-like body reaction involving a variety of symptoms such as fever, chills, general malaise, myalgia, headache, dry cough and breathlessness. It occurs following exposure to fumes containing metal oxides such as zinc oxides, released during the welding of galvanised steel.

 

Chronic respiratory risks, on the other hand, include a number of serious conditions that can occur as a result of welding operations, such as chronic bronchitis or chronic obstructive pulmonary disease (COPD), pneumoconiosis or pulmonary fibrosis, asthma, respiratory infections, and lung cancer.

 

Occupational asthma

Asthma is often one of the so-called occupational diseases, diseases that develop due to the presence of harmful stimuli in the working environment. Occupational asthma appears to be produced by welding fumes from stainless steel and is therefore attributed to chromium and nickel as hypothetical causative agents.

Unlike occupational accidents, occupational diseases do not occur immediately but develop gradually over time. The effects of exposure may appear after fifteen or twenty years.

 

 

What dust does welding expose people to?

The problem of welding dust depends mainly on the size of the dispersed particles: during cutting and brazing operations, individual particles have a diameter of 0.01 to 1 µm.

 

The smaller the dispersed particles are, the greater their ability to penetrate the lungs.

 

Breathable dusts are generally understood to be suspended particles smaller than 4 microns in size that are able to reach the alveolar area of the lungs through breathing.

 

Prevention and protective measures

The use of PPE (personal protective equipment), such as masks, overalls, goggles and gloves, is extremely important to safeguard the health of workers exposed to the risk of dust and gases.

In particular, for welding work, the use of respiratory protective devices that act against dust and unpleasant odours is recommended.

 

BLS recommends products with a dust protection class of P3.

 

This class has a minimum filtering efficiency of 99% because it is able to protect up to 50 times the exposure limit value (TLV), which identifies the limit value of concentration of airborne chemicals above which - if regularly exposed - a worker is considered to suffer adverse health effects.

 

Below are two of our BLS products suitable for safe welding operations.

 

 

  • BLS Zer0 30 C reusable filtering facepiece, with FFP3 protection and activated charcoal.
  • BLS 4000next reusable silicone half-mask used in conjunction with the BLS 201-3C activated charcoal dust filters with P3 protection.

 

It should be remembered that it is always depending on the assessment of the environmental risk, and therefore the concentration of the pollutant present, that the correct protective device can be selected.

 

Resta informato. Resta al sicuro.

 

Gerelateerde artikelen

juni 1, 2022 June events | What's next

Eventi di giugno Scopri gli eventi BLS di questo mese   / BLS LOVES ART / 11-12 giugno | URBAN GIANTS FESTIVAL 2022 Il festival dei graffiti sostenuto da BLS è tornato. Dopo due anni di stop, Milano torna ad essere sfondo per Urban Giants, l’evento di graffiti più importante d’Italia. I prossimi 11 e […]

Link
november 25, 2021 2021 advertising campaign

Tutti hanno diritto a un lavoro sicuro La nostra campagna pubblicitaria 2021 è dedicata alla sicurezza sul luogo di lavoro, da sempre core business di BLS e da oggi non solo. Il 2021 ha obbligato tutti noi a fronteggiare una emergenza sanitaria globale, in cui la protezione respiratoria ha avuto un ruolo primario. Se fino […]

Link
oktober 24, 2023 BLS Zer0 Flat Multi-fit mask

BLS Zer0 Flat: in arrivo la nuova maschera multi-fit BLS amplia la propria gamma prodotti con una nuova maschera che garantisce comfort e perfetta tenuta su tutte le tipologie di viso.     Ogni volto ha la sua forma e la sua personalità e in un mondo del lavoro multietnico e con una importante presenza […]

Link
Abonneer op onze nieuwsbrief
Ontvang updates over onze evenementen, nieuws, catalogus en aankomende initiatieven.
Abonneren

Neem contact op

Laat uw bericht achter, wij antwoorden binnen 48 uur.
Vraag informatie aan

BLS S.R.L.
Società a Socio Unico
via dei Giovi, 41 - 20032 Cormano (MI) - Italia
t/f +39 02 39310212 / 66200473
info@blsgroup.it
Privacy Policy - Cookie Policy

Geregistreerd kantoor
via dei Giovi, 41 – 20032 Cormano (MI) - Italia
Capitale Sociale | Share Capital: Euro 600.000,00 i.v.
C.C.I.A.A. - R.E.A.: MI 1186898
Partita IVA | VAT N°: IT12296780153
C.F. e Iscrizione al Registro delle Imprese di Milano: 07822320151

BLS IBERIA / Av. Pau Casals, 8 08182 Sant Feliu de Codines Barcelona - Spain
BLS NORTHWEST / Reeweg, 132 3343 AP H.I. Ambacht Rotterdam - The Netherlands
BLS DO BRASIL / Rua Alvarenga Peixoto, 307 05095-010 Sao Paulo - SP - Brazil
BLS GERMANY / Dünner Straße 249 D-41066 Mönchengladbach - Germany
BLS FRANCE / 18 Porte du Grand Lyon 01700 Neyron - France

crossmenuchevron-downcross-circle